Made to order — 12–14 week lead time
Enter your suburb and postcode for a live delivery quote.
Have questions?
Talk to a leg machines specialist| Length | 157.5 cm (62 in) |
For gyms and studios building a glute-focused training station, the Nautilus Glute Driver is a plate-loaded machine with a 163 kg max load each side and a padded waist harness that holds the lifter in position through every rep. Built on square and round tubing with 11-gauge walls up to 3 mm thick, it takes continuous multi-user loading without flex.
It suits commercial floors, 24/7 franchises and serious home setups that want a dedicated hip-thrust station with no cables, electronics or weight stack to service. The oversized angled foot platform and dual-sided safety catch make it straightforward for staff to coach and for members to load themselves, backed by a 10-year structural frame warranty.
The padded waist harness is the detail I'd flag: it locks your hips so the glute hinge stays honest, no cheating with the lower back. That isolation is the point here.
It isn't built for light or occasional use; the 326 kg plate-loaded capacity is for serious lifters. The integrated band pegs are the standout, letting operators add accommodating resistance for advanced members.
Adela Ledvinkova · Bachelor of Exercise & Sport Science · Our In-House Fitness Coach
This is a dedicated glute machine: you sit braced with a padded waist harness and drive the load through hip extension, which keeps the work on the glutes rather than letting the quads and lower back take over.
Because it is plate-loaded, the resistance feel comes straight from the iron with no cables or stack to dampen it.
What this means for you: For a studio or gym programming hip-dominant work, this gives members a glute-focused station that loads heavily and sets up fast.
The frame mixes square and round tubing with a 2.5 mm to 3 mm (11-gauge) wall thickness, which is the gauge you want under repeated heavy loading from member after member.
That wall thickness is what holds tolerances over years of continuous use rather than flexing loose.
What this means for you: In a multi-user gym, this is the build that takes daily traffic without developing rattles or play.
Max load capacity is 320 kg, which gives strong members real room to progress while the 6.8 kg starting resistance keeps the bottom end light enough for newer lifters.
That spread means one station serves your whole membership rather than just the strongest in the room.
What this means for you: For an operator, that wide range means fewer members hit a ceiling and fewer find it too heavy to start.
Two safety features handle the failure points on a heavy hip-extension machine: a dual-sided safety catch and release mechanism, plus a bottom dropout safety stop so the load cannot fall through the bottom of the range.
On a plate-loaded station that members use unsupervised, that matters more than almost anything else on the spec sheet.
What this means for you: For a 24/7 or unstaffed floor, the dual catch and dropout stop reduce the risk when members train alone.
The movement runs on commercial-grade dual pivot bearings, so the drive feels smooth and consistent through every rep rather than notchy or stiff.
Dual pivots keep the path tracking cleanly under heavy load, which is where cheaper bushings start to bind.
What this means for you: Members feel a clean, repeatable movement, and you spend less time servicing worn pivots.
The heavy contact and load points are Delrin coated, a low-friction engineering plastic that takes the rubbing wear instead of letting metal grind on metal.
It is a small spec line that quietly decides how the machine ages.
What this means for you: Less wear at the contact points means longer service life and quieter operation across a busy week.
The unit sits at 157.5 cm long, 152.5 cm wide and 89 cm tall, so it slots into a strength zone without eating the floor space a multi-station rig would.
At 89 cm tall it clears any standard ceiling easily and keeps sightlines open across the floor.
What this means for you: For fit-out planning, this is a single-purpose station you can place without redrawing the floor.
Plate storage is available as an optional bolt-on, so the plates members need live on the machine rather than scattered across the floor.
On a busy floor that keeps the station tidy and the next member ready to load fast.
What this means for you: For operators, on-station storage cuts reset time between members and keeps the area presentable.
The frame is finished in electrostatic powder coating and comes in silver, white or black, so you can match it to an existing fit-out rather than work around one fixed colour.
Standard upholstery is black, which hides daily wear well on a high-traffic station.
What this means for you: For a branded fit-out, the colour choice lets the station sit inside your existing palette.
The warranty is structured for both settings: full commercial cover runs 10 years on the structural frame, 5 years on major mechanical parts, 1 year on minor mechanical components, 90 days on upholstery and 1 year labour.
Light commercial and home use extends the minor mechanical cover to 3 years and labour to 3 years, with the same 10-year frame and 5-year major-part terms.
What this means for you: The 10-year frame term tells you the maker expects this to stay in service across a long replacement cycle.
First assembly is a one-person job using a phillips screwdriver, an allen or hex key and a spanner, so you are not booking a specialist crew to stand it up.
The full build steps are in the manual, which is worth following for the first one.
What this means for you: Plan the 12 to 14 week lead time into your fit-out schedule and you can have one person build it on arrival.
| Frame Tubing | Modern blend of square and round tubing, 2.5mm to 3mm / 11-gauge wall thickness |
| Frame Finish | Electrostatic Powder coating |
| Bearings | Commercial grade dual pivot bearings |
| Hardware | Hex / Button Head |
| Protective Surfaces | Delrin coated on heavy contact and load points |
| Standard Frame Colours | Silver, White, Black |
| Standard Upholstery Colour | Black |
| Type | Plate-loaded |
| Max Load Capacity | 326 kg (163 kg per side) |
| Starting Resistance | 6.8 kg |
| Resistance Band Pegs | Yes, integrated |
| Weight Storage | Yes, optional bolt-on plate storage |
| Safety System | Dual sided safety catch and release mechanism, bottom dropout safety stop |
| Restraint System | Heavy reinforced padded waist harness |
| Foot Platform | Oversized angled foot platform |
| Floor Protection | Rubber feet |
| Length | 157.5 cm (62 in) |
| Width | 152.5 cm (60 in) |
| Height | 89 cm (35 in) |
| Product Weight | 114 kg (252 lbs) |
| Shipping Weight | 138 kg (305 lbs) |
| Warranty (Full Commercial) | 10 years on structural frame (not coatings), 5 years on major mechanical parts, 1 year on minor mechanical components, 90 days on upholstery, 1 year labour. |
| Warranty (Light Commercial/Home) | 10 years on structural frame (not coatings), 5 years on major mechanical parts, 3 years on minor mechanical components, 90 days on upholstery, 3 years labour. |
Effort: a one-person job, see manual for a first build. Tools: a phillips screwdriver, allen / hex key and spanner / wrench.
It's plate-loaded with a 360 lbs (about 163 kg) max load capacity and 15 lbs (about 7 kg) starting resistance, so it suits everyone from first-timers to strong, experienced lifters. Integrated resistance band pegs let you add accommodating band tension over the plates. No weight stack, no cables, no electronics: load the plates you want and go.
Plan for a footprint of 157.5 cm long by 152.5 cm wide, and it stands 89 cm tall, so ceiling height is never a concern. Allow walking and loading room on the plate-loading sides plus a clear approach for members to step in and out. Optional bolt-on plate storage adds a little width but keeps loading weights within reach.
Yes. The frame uses a square-and-round tubing blend at 2.5 to 3 mm (11-gauge) wall thickness with an electrostatic powder-coat finish, commercial-grade dual pivot bearings, and Delrin-coated heavy contact and load points. That's the spec I look for in a machine sitting on a busy 24/7 floor with hundreds of reps a day across many members.
A dual-sided safety catch and release mechanism plus a bottom dropout safety stop manage the movement on both sides, and a heavy reinforced padded waist harness holds the lifter in position. The oversized angled foot platform gives a stable, repeatable base. For a thrust-pattern machine carrying real load, those restraint and catch points are what I'd stake the recommendation on.
Under full commercial use: 10 years on the structural frame (not coatings), 5 years on major mechanical parts, 1 year on minor mechanical components, 90 days on upholstery, and 1 year labour. Light commercial or home use extends minor mechanical parts and labour to 3 years each. We handle the warranty locally, so you deal with us, not an overseas manufacturer.
This is a special-order item with a lead time of 12 to 14 weeks from your order date. It ships at 138 kg, so it arrives by freight on a pallet. We'll keep you across the booking and the delivery window, and you can request a quote covering bulk or fleet orders and installation for larger fit-outs.
It's a one-person job, though a second set of hands helps with the 114 kg of frame. You'll need a phillips screwdriver, an allen/hex key and a spanner or wrench. Hardware is hex and button-head throughout. Follow the manual closely on a first build, and budget unhurried time to set the safety catches and harness correctly.
Take photos before unpacking and send them to support@cardioonline.com.au within 48 hours of delivery. We'll lodge the freight claim, organise replacement parts or a full unit, and stay across it until you're set up. You don't deal with the courier or the manufacturer directly: that's our job.
Click below to download the user manual.
This product has a 12 week lead time from date of purchase.
Use the shipping calculator beside the Add to Cart button for an exact quote to your postcode. Approximate delivery times across Australia:
Try it for 100 days. Return it if it is not right.
If your equipment is not right for your space or your training once you have lived with it, you can request a return within 100 days of purchase for a refund of the product price.
Available on products showing the 100 Day Money Back Guarantee badge. Return shipping is paid by the customer unless otherwise agreed. Original delivery, installation and service fees are non-refundable. See the full policy: /pages/risk-free-returns
Found it cheaper elsewhere? We’ll match it. Read our Price Match Guarantee for the details.
