Cardio Equipment Lubrication Kit

Keep your treadmill in perfect working order with the Cardio Equipment Lubrication Kit. This easy-to-use kit helps to lubricate the system while removing dirt, and lengthens the life of your treadmill mat, deck and motor.

• Easy to use
• No messy hands
• Removes dirt
• Reduces costly repairs
• Prolongs motor life
• Prolongs belt life

• Includes a silicone-based lubricant designed to stop any friction between the belt and the rollers and give you a smooth run
• Includes a specially designed Allen key to easily adjust the belt of your treadmill
• Includes wand for easy application
• Helps clean dirt from your treadmill in order to stop a build-up of grime which can have a harmful effect on the belt and the motor

Treadmill Maintenance Tips

An insufficiently lubricated deck will cause the belt, running deck and motor to wear out much quicker. How often you should lubricate depends on usage. We recommend the following:

• Light use (less than 3 hours per week) – every 12 – 16 weeks
• Medium use (3 to 5 hours per week) – every 8 – 12 weeks
• Heavy use (more than 5 hours per week) – every 4 – 6 weeks

Keeping the deck lubricated is the most important activity you can carry out to prolong the life of your treadmill. You can check for proper lubrication levels at any time by doing the following:

• Disconnect the treadmill from the power supply
• Fold up the running deck, so the treadmill is in the storage position
• Put your hand underneath the mat and feel along the running deck, as close to the centre of the deck as you can.
• If your hand gets a light coating of lubricant, then no further lubrication is required
• If the surface feels dry and your hand feels clean, then apply more lubricant

Ellipticals & Exercise Bike Maintenance Tips

Firstly clean the Aluminium Rails and Wheels thoroughly with a clean soft cloth to remove any grease, dirt or grit. You may need to use rubbing alcohol or something similar if rails and wheels are excessively dirty.

Lubricate the rails by applying a small dollop of BFE Lubricant to a soft cloth and running the cloth along the rails. Use the elliptical as you would normally to work the lubricant into the wheels evenly.