Pre-order — ships in approx. 5 weeks
or 4 interest-free payments of
$80 with
ⓘ
or 4 interest-free payments of
$80 with
Est. delivery to $ TBC
Enter your suburb and postcode for a live delivery quote.
Have questions?
Talk to a weight plates specialist| Warranty | 12 Months Parts replacement warranty |
If you lift at home and need a full loadable set, this 80kg tri-grip set runs from 1.25kg micro plates up to 20kg discs, matched across both sides for balanced loading on an Olympic bar. The 50mm holes fit standard Olympic sleeves, and the triple-handle cut-outs make each plate easy to carry and load one-handed.
It suits a lifter who wants commercial-grade plates that are kind to floors and equipment, since each plate is encased in heavy-duty rubber over inner steel rings. The spread of pairs, including four 1.25kg plates, gives you small jumps for progressive overload as you get stronger.
What stands out is the tri-grip shape: those three cutouts let you deadlift, curl or press without a bar, so these plates double as handled weights when you need them.
With 2.5kg and 1.25kg pairs in the set, you can add as little as 2.5kg to the bar at a time. The rubber encasing is the real win: it protects your floors and equipment.
Adela Ledvinkova · Bachelor of Exercise & Sport Science · Our In-House Fitness Coach
Each plate is encased in heavy-duty rubber over inner steel rings, built to a commercial grade so it stands up to daily loading in a busy home or commercial gym.
The rubber coating cushions the impact when you set the bar down and keeps the finish on your floor intact.
What this means for you: Built to take repeated loading while protecting your floors, walls and equipment.
The three cut-out grips let you carry, load and change plates one-handed without fumbling a 20kg disc onto your foot.
In practice, the Tri-Grip shape makes moving plates around the rack far easier than a flat disc.
What this means for you: Handling and swapping plates mid-session is quick and secure.
The 50mm centre hole fits standard Olympic bar sleeves, so these plates slide straight onto any Olympic bar with 50mm sleeves.
What this means for you: No adapters needed if your setup already runs Olympic bars.
The set totals 80kg across matched pairs, so you can balance both ends of the bar and build weight in small, even steps as you progress.
The spread of denominations means you can make jumps as small as 2.5kg on the bar.
What this means for you: Enough range to load your main lifts and still fine-tune progression week to week.
| Structure | Encased in heavy-duty rubber with inner steel rings |
| Design | Tri-Grip |
| Grade | Commercial |
| Hole Diameter | 50mm |
| Compatibility | Olympic sized bar sleeves |
| Total Weight | 80kg |
| Plate Set Breakdown | 2 x 20kg, 2 x 10kg, 2 x 5kg, 2 x 2.5kg, 4 x 1.25kg |
| Warranty | 12 Months Parts replacement warranty |
You get a full spread: 2 x 20kg, 2 x 10kg, 2 x 5kg, 2 x 2.5kg and 4 x 1.25kg, totalling 80kg. That mix lets you load a bar in small jumps, which matters when you're adding 1.25kg a side to keep progressing. It's enough plate to build real strength on compound lifts for most home lifters.
Yes. The hole diameter is 50mm, so they slide onto any standard Olympic sized bar sleeve. If your bar has 50mm sleeves, these are a match. They won't fit a standard 25mm bar, so check your bar's sleeve diameter before ordering if you're unsure which one you have.
No. These are rubber-coated plates, not bumpers, so they aren't built to be dropped from height. The heavy-duty rubber over inner steel rings protects your floor, walls and equipment when you set the bar down or knock a plate. Lower the bar under control, and put a rubber gym mat underneath, especially on concrete or upstairs.
The three cut-out handles make the plates far easier to carry and load, which you'll appreciate every time you shift a 20kg plate across the room. Tri-grip also makes them simpler to grab for plate-loaded exercises. In my experience it's a small detail that saves your fingers and your back over years of training.
A weight tree or plate rack keeps the set tidy and off the floor, which I'd strongly recommend over stacking them. Rubber-encased plates are thicker than bare iron of the same weight, so leave a little extra room on the sleeve. Plan for a storage spot before the set arrives so you're not tripping over plates.
They come with a 12 month parts replacement warranty, handled by us here in Australia. If a plate has a genuine fault within that period, contact our team and we'll sort a replacement. Keep your order details handy so we can process any claim quickly.
Take photos before unpacking fully and send them to support@cardioonline.com.au within 48 hours of delivery. We'll lodge the freight claim and organise a replacement plate, and stay across it until you're sorted. You don't deal with the courier or manufacturer directly, that's our job.
If this product page shows the 100 Day Money Back Guarantee badge, you have 100 days to return it. Plates need to be as-new in the original packaging with all parts included. There's no restocking fee, and we refund the product price plus your original delivery fee. We organise the return freight, you cover its cost.
This product ships in 2-3 business days after you place your order.
Use the shipping calculator beside the Add to Cart button for an exact quote to your postcode. Approximate delivery times across Australia:
Try it for 100 days. Return it if it is not right.
If your equipment is not right for your space or your training once you have lived with it, you can request a return within 100 days of purchase for a refund of the product price.
Available on products showing the 100 Day Money Back Guarantee badge. Return shipping is paid by the customer unless otherwise agreed. Original delivery, installation and service fees are non-refundable. See the full policy: /pages/risk-free-returns
Found it cheaper elsewhere? We’ll match it. Read our Price Match Guarantee for the details.
