Made to order — 12–14 week lead time
Est. delivery to $ TBC
Enter your suburb and postcode for a live delivery quote.
Have questions?
Talk to a multi-station gyms specialist| Assembled Dimensions | 180 cm (L) x 120 cm (W) x 211 cm (H) |
| Frame | Electro-welded square tubing, 2.5-2.75 mm thickness |
| Product Weight | 264 kg |
Fit-out managers at hotels, serviced apartments and strata gyms who need one station that covers a full-body circuit should look at the IF1860, which runs a 90 kg stack in 5 kg increments and holds users up to 150 kg. It packs lat pulldown, press, row and more into a footprint of 180 cm by 120 cm, with yellow colour-coded adjustment points and a magnetic selector pin that keep member changeovers fast.
It's built for shared facilities: 2.5 to 2.75 mm electro-welded square tubing, 5 mm aircraft-grade cables rated to 4,200 lb, ABEC-rated pulleys and industrial-grade vinyl over 38 mm foam are built for continuous multi-user use. Request a quote for installation and lead times on fleet orders.
The magnetic weight selection pin is the detail I'd flag: swapping loads across an 18-plate, 90kg stack takes a second, which keeps traffic moving when several members are circuiting between stations.
The single stack means it runs one user at a time, so busy floors need realistic station spacing. For leg-focused sites, I'd add the optional LP3 leg press attachment to broaden the lower-body work.
Adela Ledvinkova · Bachelor of Exercise & Sport Science · Our In-House Fitness Coach
This single station packs a full upper and lower body circuit into a floor area of 180 cm long by 120 cm wide, with a selectorised 90 kg stack and four included attachments.
For a studio, hotel gym or serviced-apartment fit-out, it gives members a complete pin-loaded workout without the floor space or supervision a free-weight area demands.
What this means for you: One station covers the core strength movements, so a small facility can offer a full circuit without a dedicated weights room.
The frame is built from electro-welded square tubing with a 2.5 to 2.75 mm wall thickness, then electrostatic powder-coated for a hard, consistent finish.
That wall gauge and the 264 kg total mass are what hold the unit steady under continuous multi-user loading, session after session.
What this means for you: In a commercial room, this is the kind of frame that stays tight and rattle-free through years of daily use.
The stack holds 90 kg across 18 plates in 5 kg increments, selected with a magnetic weight pin for fast, clean changes between sets.
The plates run on 25 mm steel guide rods, which keeps the travel smooth and quiet even when the stack is working hard.
What this means for you: The 5 kg steps and magnetic pin mean a line of members can rotate through quickly without fiddly changes.
The cables are 5 mm American Loos aircraft-grade with a 4,200 lb breaking strength, running over pulleys set on ABEC-rated bearings.
That combination is why the pull feels consistent and the system keeps running smoothly through high-traffic days.
What this means for you: Cables and bearings at this spec are the parts that decide how a station feels after a few thousand reps, and this is where this one earns its keep.
The station ships with a revolving lat bar, a revolving straight bar, an ankle strap and an ab/tricep strap, covering pulldowns, rows, curls, pressdowns and cable work from day one.
An optional LP3 leg press attachment extends the station into lower-body pressing if you want it to do more.
What this means for you: The four included attachments mean it is ready to program a full upper-body circuit the moment it is built.
The telescoping back pad plus seat and back pad adjustments let the station fit a wide range of member heights and reach lengths.
Adjustment points are yellow colour-coded, so members and staff can set up correctly without a long briefing.
What this means for you: Clear, colour-coded adjustments cut down the guesswork for members who have never used the station before.
The pads use industrial-grade vinyl over a 38 mm thick foam core, built to take repeated cleaning and constant contact.
In a shared facility the upholstery is a wear point, so this grade of vinyl and foam depth is what keeps the station looking cared-for.
What this means for you: Tough vinyl and a deep foam core hold their shape and finish through frequent wiping and daily use.
At 180 cm long, 120 cm wide and 211 cm tall, the station maps cleanly into a floor plan and clears a standard 2.4 m ceiling.
Planning the surrounding access and matting around a 264 kg unit matters more than the footprint itself, since it sits in place once built.
What this means for you: It drops into a modest footprint, so confirm the position is permanent before you build it in.
This is a special-order station with a lead time of 12 to 14 weeks from the order date, shipped across six cartons for assembly on site.
Plan the install into your fit-out timeline early, and talk to us about quotes, lead times and bulk or fleet orders.
What this means for you: Order it well ahead of your opening or refurb date so it lands when the room is ready.
| Frame | Electro-welded square tubing, 2.5-2.75 mm thickness |
| Finish | Electrostatic powder-coated |
| Cables | 5 mm American Loos aircraft-grade, 4,200 lb breaking strength |
| Pulleys | ABEC-rated bearings |
| Bushings | Commercial-grade precision nylon |
| Guide Rods | 25 mm diameter, steel |
| Axle Diameter | 25 mm |
| Upholstery | Industrial-grade vinyl over 38 mm thick foam core cushions |
| Adjustments | Telescoping back pad, seat/back pad adjustments, yellow colour-coded adjustment points, magnetic weight selection pin |
| Included Attachments | Revolving lat bar, revolving straight bar, ankle strap, ab/tricep strap |
| Optional Attachments | LP3 leg press attachment |
| Weight Stack | 90 kg (18 plates in 5 kg increments) |
| Maximum User Weight | 150 kg |
| Product Weight | 264 kg |
| Assembled Dimensions | 180 cm (L) x 120 cm (W) x 211 cm (H) |
| Packaging | Carton 1: 98.8 kg (189x91x26.5 cm), Carton 2: 53.8 kg (108x103x22 cm), Carton 3: 26.4 kg (194x47x24 cm), Carton 4: 32.8 kg (32x18x16.5 cm), Carton 5: 40 kg (30x28x13 cm), Carton 6: 11.6 kg (21.5x18x11 cm) |
Effort: 16 assembly steps; the manual strongly recommends professional installers, who take about 2 hours, and a second person if you build it yourself. Tools: ratchet wrench and sockets, adjustable wrench, rubber mallet and hex keys.
The IF1860 is a special-order item with a 12 to 14 week lead time from your order date. It arrives across six cartons, the heaviest around 98.8 kg and about 263 kg in total. We ship Australia-wide with live tracking, so you'll know where your freight is at each stage. For bulk or fleet orders and installation, request a quote and we'll scope it with you.
Take photos before unpacking and send them to support@cardioonline.com.au within 48 hours of delivery. We lodge the freight claim, organise replacement parts or a full unit, and stay across it until you're up and running. You don't chase the courier or the manufacturer yourself. That's our job, and we handle it end to end.
The manual strongly recommends professional installers, who take about 2 hours; if it's your first build of this type, plan for longer and get a friend to help, since some components are large, heavy or awkward to handle alone. There are 16 steps, and you'll need a ratchet wrench and sockets, an adjustable wrench, a rubber mallet and a hex key set. Request a quote if you'd like installation organised.
Every commercial machine we sell is covered by a commercial warranty, with an Australian warranty servicing team. Specific terms for the IF1860 are confirmed at point of sale, so request a quote and we'll put the exact cover in writing alongside pricing and lead time. If anything needs attention down the track, you deal with our team directly.
Assembled, the IF1860 measures 180 cm long, 120 cm wide and 211 cm high. At 2.11 m it clears a standard 2.4 m Australian ceiling comfortably. Allow working room around the stack and the user stations so members or guests can move between exercises without crowding. For commercial fit-outs, factor in clear access on the lat and press sides.
The IF1860 suits PT studios, hotels, body corporate gyms and serious home gyms wanting one station that covers major muscle groups. Maximum user weight is 150 kg. The 90 kg stack moves in 5 kg increments across 18 plates, with magnetic pin selection, so it works for beginners through to experienced lifters sharing the same machine.
Yes. The cables are 5 mm American Loos aircraft-grade with a 4,200 lb breaking strength, running over ABEC-rated bearing pulleys on commercial-grade nylon bushings. The frame is electro-welded square tubing, 2.5 to 2.75 mm thick, powder-coated. That's built for daily back-to-back sessions, not light household use. It's the cable and bearing spec that earns this one its place on a commercial floor.
Yes. The LP3 leg press is an optional attachment you can add to extend the station into lower-body work. The machine ships with a revolving lat bar, revolving straight bar, ankle strap and ab/tricep strap as standard. If you want the leg press included from the start, mention it when you request a quote and we'll spec it in.
Click below to download the user manual.
Download the user manual (PDF)This product has a 12 week lead time from date of purchase.
Use the shipping calculator beside the Add to Cart button for an exact quote to your postcode. Approximate delivery times across Australia:
Found it cheaper elsewhere? We’ll match it. Read our Price Match Guarantee for the details.
